Perfectionists building tooling
for
Perfectionists

MACRO Store
To Order Call: 1- 586-755-5820

Ordering Code: MA1

Click here for warranty

Name : Macro Compatible 54mm Holder
Manufacturer : High Quality Sunspot Generic
Part number :
Similar to 3R-651.7E-XS
Condition :   NEW  
Description : 54mm Square, 12.5mm thick ~ A true solid one piece design. The M6 dowel holes are not to be used for perfect locating. You can jig grind them if you wish. You will be very happy with these holders.

Price: $23  Now: $19.50 each

(see our “Discount schedule”)

Ordering Code: MA1-T9

Click here for warranty

Name : Storage Tray
Manufacturer : High Quality Sunspot Generic
Condition :  NEW  
Description : Holds 9 Erowa or 54mm Macro holders.

.92” x 13” x 14”

Price :
$9.75

(see our “Discount schedule”)

Ordering Code: MA2

Click here for warranty

Name : Slotted adaptor, 5" long
Manufacturer : High Quality Sunspot Generic
Condition :   NEW 
Description : 55mm wide x 29.5mm high and 5” long. The slot is 20.5 wide and is 12.5mm deep. The 54mm new holder is included and mounted as per the image.

Price : $38

(see our “Discount schedule”)

Ordering Code: MA3

Click here for warranty

Name : Slotted adaptor, macro
Manufacturer : High Quality Sunspot Generic
Condition :   NEW 
Description : 54mm square aluminum x 30mm thick. 20.5mm slot by 12.5mm deep. Includes a mounted new generic 54mm Reference Element. 10mm from center to the solid wall.

Price : $37 each

Price : $23 each (without the 54mm holder)

(see our “Discount schedule”)

Ordering Code: MA3-30

Click here for warranty

Name : Slotted adaptor, macro (30mm slot)
Manufacturer : High Quality Sunspot Generic
Condition :   NEW 
Description : 54mm square blackened low carbon steel. Tapped on the bottom (M6) ready to accept 54mm holders. 29.5mm thick, 30mm wide slot, 12mm deep. No round pocket for code carrier. 15mm from center to the solid wall. 35mm long M8 screws. Similar to System 3R 3R-658.2E-S.

Price : Sold out at the moment

(see our “Discount schedule”)

Ordering Code: MA3-30-H

Click here for warranty

Name : Slotted adaptor, macro (30mm slot)
Manufacturer : High Quality Sunspot Generic
Condition :   NEW 
Description : 54mm square blackened low carbon steel. 29.5mm thick, 30mm wide slot, 12mm deep. Includes a mounted new generic 54mm Reference Element. No round pocket for code carrier. 15mm from center to the solid wall. 35mm long M8 screws. Similar to System 3R 3R-658.2E-S.

Price : Sold out at the moment

(see our “Discount schedule”)

Ordering Code: MA4-16P

Click here for warranty

Name : Pocket Holder for macro
Manufacturer : High Quality Sunspot Generic
Condition :   NEW 
Description : 54mm square aluminum x 30mm thick, 12.5mm deep 16mm x 16mm pocket with 2 M8 set screws.

Includes a mounted new generic 54mm Reference Element.

Price : $39

(see our “Discount schedule”)

Ordering Code: MA4-26.5P

Click here for warranty

Name : Pocket Holder for macro
Manufacturer : High Quality Sunspot Generic
Condition :   NEW 
Description : 54mm square aluminum x 30mm thick, 12.5mm deep 26.5mm x 26.5mm pocket with 2 M8 set screws. The size is ideal for 1” square electrodes.

Includes a mounted new generic 54mm Reference Element.

Price : $39

(see our “Discount schedule”)

Ordering Code: MA4-Solid

Click here for warranty

Name : Holder, solid blank
Manufacturer : High Quality Sunspot Generic
Condition :   NEW 
Description : 56mm square x 30mm thick aluminum block

Includes a mounted new generic 54mm Reference Element.

Price : $35.50

(see our “Discount schedule”)

Ordering Code: MA5

Click here for warranty

Name : Spacer block for macro
Manufacturer : High Quality Sunspot Generic
Condition :   NEW 
Description : 54mm square low carbon steel x 17.4mm thick, tapped M6 at 4 locations for mounting the 54mm reference element (included). The side slots accept M6 SHCS. Center bore is 7mm and c’bored 13.75 diameter x 1.75mm deep. Steel spacer is precision ground top and bottom.

Price : $46
 

(see our “Discount schedule”)

Ordering Code: MA5-B

Click here for warranty

Name : Spacer block for macro
Manufacturer : High Quality Sunspot Generic
Condition :   NEW 
Description : Base only. 54mm square low carbon steel x 17.4mm thick, tapped M6 at 4 locations for mounting your 54mm reference element (not included). The side slots accept M6 SHCS. Center bore is 7mm and c’bored 13.75 diameter x 1.75mm deep. Precision ground top and bottom.

Price : $26

(see our “Discount schedule”)

Ordering Code: MA6

Click here for warranty

Name : 70mm Holder
Manufacturer : High Quality Sunspot Generic
Condition :   NEW 
Description : Very rugged for large electrodes

Price : $53  

(see our “Discount schedule”)

Ordering Code: MA7

Click here for warranty

Name : 70mm Holder
Manufacturer : System 3R
Condition :   NEW   
Part Number: 3R-601.7E
Description : Macro HP, cast and hardened

Price : $133 each (5 are in stock. $450 for the lot of 5 pieces)

(see our “Discount schedule”)

Ordering Code: MA8

Click here for warranty

Name : Touch Probe for the Macro System
Manufacturer : High Quality Sunspot Generic
Condition :   NEW  
Description : Low cost solid type. 5mm ball.

Long or short generic drawbar included (your choice).

Price : $575

(see our “Discount schedule”)
 

Ordering Code: MA8-F

Click here for warranty

Name : Touch Probe for the Erowa ITS System
Manufacturer : High Quality Sunspot Generic
Condition : NEW

Description : Spring loaded tip. 2mm and 4mm Tungsten ball are available. A generic DrawBar (your choice, long or short) is included.

Price : $1150  (with 4mm ball) add $50 for 2mm ball

Click for Video of a similar tool: https://www.youtube.com/watch?v=a7RdCY8u97Q

NOTE: You must tram your tool after removing or installing a new tip. Our service department can do this within .0001” for a cost of $240 (3 day turn around).

(see our “Discount schedule”)

Ordering Code: MA8-F2016

Click here for warranty

Name : Touch Probe for the Macro System
Manufacturer : High Quality Sunspot Generic
Condition : NEW

Description : Spring loaded tip. A generic DrawBar (your choice, long or short) is included.

Price : $1250 (with 5mm or 6mm ball)

NOTE: You must tram your tool after removing or installing a new tip. Our service department can do this within .0001” for a cost of $240 (3 day turn around).

(see our “Discount schedule”)

Ordering Code: MA9

Click here for warranty

Name : Collet Chuck for Macro
Manufacturer : High Quality Sunspot Generic
Condition :   NEW   
Description : Accepts ER32 collets. Flushing option: inside opened to allow larger and longer electrodes plus you receive a set of 10 seals with wave washer. Spanner wrench AND a generic drawbar (your choice of long or short) is included.

Price: $365 without flushing and slight flaw which does not effect the performance. Flushing not possible on this tool.

Price: $525 without flushing.

Price: $685 with flushing.

(see our “Discount schedule”)

Ordering Code: MA11-7

Click here for warranty

Name : 10mm Expanding Dowel
Manufacturer :
System 3R
Condition :   USED  
Description : Expands using a 9/64” hex wrench
Description : Very good condition. 90 day warranty that they will work as new.

Price : $110 each. We have 7 pieces. $710 for the 7 pieces.

(see our “Discount schedule”)

Ordering Code: MA12

Click here for warranty

Name : 10mm Expanding Dowel
Manufacturer : Sunspot Tooling Systems
Condition :   NEW  
Description : Expands using a 3mm hex wrench

Price :
$175

Price :
$160 each, 4 or more

(see our “Discount schedule”)

Ordering Code: MA13

Click here for warranty

Name : 20mm Expanding Dowel
Manufacturer : Sunspot Tooling Systems
Condition :   NEW  
Description : Expands using hex wrench

Price :
$185 each

Price :
$170 each, 4 or more

(see our “Discount schedule”)

Ordering Code: MA15

Click here for warranty

Name : Macro DrawBars (Long)
Manufacturer : System 3R
Part number : 3R-605.1
Condition :
  NEW   and   USED   
Description : Long version

Price : $72 each (NEW System 3R)

Price : $59 each (NEW generic)

(see our “Discount schedule”)

Ordering Code: MA15-C

Click here for warranty

Name : Macro DrawBar locking clip
Manufacturer : High Quality Sunspot Generic
Condition :   NEW 

Price :  $4 each

(see our “Discount schedule”)

Ordering Code: MA16

Click here for warranty

Name : Macro DrawBars (short)
Manufacturer : System 3R
Part number : 3R-605.2
Condition :   NEW   and
 USED
Description : Short version

Price : $72 each (NEW System 3R)

Price : $62 each (Used, perfect System 3R) (sold)

Price : $58 each (NEW generic)

(see our “Discount schedule”)

Ordering Code: MA17

Click here for warranty

Name : Macro DrawBars for Quad
Manufacturer :
High quality Sunspot Generic
Part number : similar to 3R-605.3E
Condition :   NEW  
Description : 7mm longer than the short drawbar. For a quad chuck only. This item discontinued by System 3R

Price: $95  Now: $75 each

(see our “Discount schedule”)

Ordering Code: MA17.5

Click here for warranty

Name : Macro DrawBar
Manufacturer :
High quality Sunspot Generic
Part number : similar to 3R-605.10
Condition :   NEW  
Description : Used on pneumatic chuck. Includes plastic clip

Price: $85 each

(see our “Discount schedule”)

Ordering Code: MA18

Click here for warranty

Name : Motor for various spindles
Manufacturer : German
Condition :   USED   , as   NEW   
Description : 28mm diameter, 42mm long, 3mm output shaft. DC motor for variable drive spindles.

Price : $245

(see our “Discount schedule”)

Ordering Code: MA19

Click here for warranty

Name : Drive Gear
Manufacturer : Sunspot Generic
Condition :   NEW   
Description : Fits many System 3R rotating spindles. 6mm bore with 2 set screws. Gear OD is 17.6mm, overall height is 17.6. Replace your worn drive gear.

Price : $45

(see our “Discount schedule”)

Ordering Code: MA20

Click here for warranty

Name : Macro DrawBar (15mm)
Manufacturer : System 3R
Part number : 3R-405.16E
Condition : Used, but they are in near   new condition   
Description : For Combi Chucks

Price : $76 each (only 5 available Feb 19, 2018)
            $390 for the lot of 5 while available

(see our “Discount schedule”)

Ordering Code: MA20-C

Click here for warranty

Name : Macro Combi-DrawBar (15mm) plastic clip
Manufacturer : System 3R
Part number : 3R-
13854-01
Condition :   NEW  
Description : For Combi drawbars.

Price : $7.25 each

(see our “Discount schedule”)

Ordering Code: MA22

Click here for warranty

Name : Reference Tables
Manufacturer : System 3R
Part number : 3R-936-xxx
Condition :
  USED  , excellent
Description : Hardened with master 20mm dowel holes and tapped M12. Sizes are approx 1.25” (31mm) x 21.625” (550mm) x 33.50” (850mm)
and 1.25” (31mm) x 9.875” (250mm) x 33.50” (850mm)

Price: $790  Now: $675 for the smaller unit and $1100 - Now: $885 for the larger. FREE shipping is not offered on this particular item.

(see our “Discount schedule”)

Ordering Code: MA24

Click here for warranty

Name : 90 degree chuck for macro 54mm holders
Manufacturer : High Quality Sunspot Generic
Part number : MA24
Condition :   NEW   
Description : Accepts 54mm holders.

Price : $735

(see our “Discount schedule”)

Ordering Code: MA25

Click here for warranty

Name : Chuck for 54mm macro holders
Manufacturer : High Quality Sunspot Generic
Part number : Similar to 3R-610.21
Similar 3R-610.21-S has the round top
(MA25-R)
Condition :   NEW   
Description : 70mm Cube. Uses included 5mm hex wrench for locking the holder.

Price : $1350 Ground on top, bottom and rear (as per image).

Price : $1485 Ground on top, bottom 2 sides and the rear.

(see our “Discount schedule”)


Click to see one of Sunspot’s exclusive features

Ordering Code: MA26

Click here for warranty

Name : Chuck for 54mm macro holders
Manufacturer : High Quality Sunspot Generic
Condition :   NEW   
Description : Quick release lever action. The base is 4.370” square. Rear side is ground square and parallel. This tool takes the “short” drawbar. Lever is included.

Price: $1350  Now: $1125

(see our “Discount schedule”)

Ordering Code: MA27

Click here for warranty

Name : Screw and Plunger for Chucks
Manufacturer : High Quality Sunspot Generic
Condition :   NEW   
Description : Improved (stronger) and fits all Macro blocks and chucks which use a 5mm hex. Keep an extra one in stock just in case. Now with larger diameter for added strength and included the larger retainer plate and screw (shown). Thread is M8 x 1.25

Price : $65 3 or more at $59 each

(see our “Discount schedule”)

Ordering Code: MA27-P

Click here for warranty

Name : Plate and screw
Manufacturer : High Quality Sunspot Generic
Condition :   NEW   
Description : Fits many Macro blocks and chucks. Thicker and held firmer than the original design. Uses the included stainless steel 4mm socket head cap screw.

Price : $22
 

(see our “Discount schedule”)

Ordering Code: MA28T

Click here for warranty

Name : Macro Chuck
Manufacturer : High Quality Sunspot Generic
Part number :
Similar to 3R-610.24-S
Condition :   NEW   
Description : Very high quality and guaranteed (see details)

Price : $925
 

(see our “Discount schedule”)


Click to see one of Sunspot’s exclusive features

Ordering Code: MA28TRL

Click here for warranty

Name : Macro Chuck
Manufacturer : High Quality Sunspot Generic
Part number :
Similar to 3R-600.24-S (top only)
Condition :   NEW   
Description : Very high quality and guaranteed. The actuating screw uses a 5mm hex wrench. Sunspot accuracy, see roller (image to the right)

Price : $925 

(see our “Discount schedule”)


Click to see one of Sunspot’s exclusive features

Ordering Code: MA28TS

Click here for warranty

Name : Macro Chuck
Manufacturer : High Quality Sunspot Generic
Part number :
Similar to 3R-610.21 (top only)
Condition :   NEW   
Description : Very high quality and guaranteed. The actuating screw is 4mm, not 5mm

Price : $925 

(see our “Discount schedule”)


Click to see one of Sunspot’s exclusive features

Ordering Code: MA30

Click here for warranty

Name : 3 or 4 station milling chuck for Macro
Manufacturer : Sunspot Tooling Systems
Part number: MA30-3 and MA30-4
Condition :   NEW   
Description: 3 or 4 Generic chucks. The base is .75” thick by 3” wide. Center to center of the chucks is 4”. Overall length is 13” for the 3 station and 17.2” for the 4 station. This tool can be bolted directly to your table or on the optional stand offs which makes it easier to clamp the holders. Generally required for macro chucks.

Price for 3 station: $3820

Price for 4 station: $4925

Price for standoffs: $30 each


(see our “Discount schedule”)

Ordering Code: MA31

Click here for warranty

Name : 2 station milling block
Manufacturer : High Quality Sunspot Generic
Part number : MA31
Condition :   NEW   
Description : Available soon (April 2018). Sold with or without round generic chucks. Vertical and horizontal milling saves time.

Price : To be determined


(see our “Discount schedule”)

Ordering Code: MA33

Click here for warranty

Name : Combi-Chuck - Automatic
Manufacturer : System 3R
Part number : 3R-460.83-1
Condition : Appears   NEW   
 

Price: $1625  Now: $975

(see our “Discount schedule”)

Ordering Code: MA34

Click here for warranty

Name : Combi-Chuck - Automatic
Manufacturer : System 3R
Part number :
3R-460.87-1
Condition :
  USED  , looks like it has never been used
Description : Pneumatic.

Price: $1625  Now: $975

(see our “Discount schedule”)

Ordering Code: MA36

Click here for warranty

Name : Control Rule for Macro
Manufacturer : High Quality Sunspot Generic
Condition :   NEW   
Description : Excellent for finding the center of a chuck and checking how square the chuck is. Generic DrawBar is included (your choice, short or long). Similar to 3R-656.1

Price : $590


(see our “Discount schedule”)

Ordering Code: MA39

Click here for warranty

Name : Indicating Spindle for Macro
Manufacturer : System 3R
Part Number: 3R-656.2
Condition : Used
Description : Does show some signs of use but we guarantee satisfaction for 90 days or return for a full refund. A generic DrawBar is included (your choice, short or long).

SOLD

Ordering Code: MA42

Click here for warranty

Name : Low profile manual Chuck
Manufacturer : System 3R
Part Number: 3R-602.27
Condition : Used (near new condition)
Description: For Macro 54mm holders. Custom locking handle included.

Price : $875

(see our “Discount schedule”)

Ordering Code: MA47

Click here for warranty

Name : Hydraulic Repair kit
Manufacturer : Sunspot Tooling Systems
Condition :   NEW 
Description : For System 3r Macro to 20mm Adaptor only

Price :  $39 

(see our “Discount schedule”)

Ordering Code: MA59

Click here for warranty

Name : Wire tooling Rule
Manufacturer : System 3R
Part Number: 3R-239-XXX and other
Condition : USED (as new)
Description : Many sizes are available. 1 set measures 406mm to working ends and 438mm overall length. Another set is 36mm thick x 86mm wide x about 594mm overall length.

SOLD

Ordering Code: MA64

Click here for warranty

Name : Vise, 52mm
Manufacturer : High Quality Sunspot Generic
Condition : NEW  (Stainless Steel)
Description : Very high quality wire edm vise. 52mm (2.0”) max opening, depth of the jaw is 19.5mm. Overall sizes are: 21mm thick x 100mm x 102mm. Center to Center for 8mm mounting screws is 50mm.

Price :  $385 

(see our “Discount schedule”)

Ordering Code: MA90

Click here for warranty

Name: Holder, Macro HP
Manufacturer : System 3R
Condition :
  USED   
Description : 3R-651.13

Price: $475  Now: $375

(see our “Discount schedule”)

Ordering Code: MA95

Click here for warranty

Name : Manual Chuck Adapter
Manufacturer : System 3R
Part number : 3R-653
Condition :
 USED
Description: Serviced (hydraulics) by Sunspot and guaranteed for 1 year. Image shows the type of tool but not the actual tool being sold. A generic drawbar is included at no cost, please let us know if you want the long or short version.

Price: $625 Now: $490 for a near new tool with .0001” wear in the bore

Price each: $475 for a excellent plus tool with .0002-.0003” wear in the bore

Price each: $325 for a tool with wear in the .0005” area.


(see our “Discount schedule”)

Ordering Code: MA97

Click here for warranty

Name : Manual Chuck Adapter
Manufacturer : System 3R
Part number : 3R-603
Condition :
  USED   excellent plus, plus
Description : Serviced by Sunspot and guaranteed for 1 year. Nice quick release. 70mm x 70mm

Customer to set the eccentric stop.

Price: $525  Now: $215

(see our “Discount schedule”)

Ordering Code: MA100

Click here for warranty

Name : Macro-Junior Extension/Adapter
Manufacturer : System 3R
Part number: 3R-466.10033
Condition :   USED   excellent plus
Description : Includes center screw with flushing hole. 100mm extension.

SOLD

Ordering Code: MA110

Click here for warranty

Name : MacroJunior DrawBar
Manufacturer : System 3R
Part number: 3R-405.11E
Condition : excellent plus
 USED
Description : 15mm diameter

Price :
$19 each (lot of 10 pieces while they last $185)

(lot of 20 pieces while they last $360)

(see our “Discount schedule”)

Ordering Code: MA111

Click here for warranty

Name : MacroJunior DrawBar
Manufacturer : System 3R
Part number:
Condition : excellent plus
 USED
Description : This is the shorter drawbar used for many Jr. Chucks. This is a hard to find item. 15mm diameter

Price : $68 each

(see our “Discount schedule”)

Ordering Code: MA113

Click here for warranty

Name : MacroJunior Coins (pallet)
Manufacturer : System 3R
Part number: 3R-491E
Condition :
 USED excellent
Description : Includes the M6 threaded insert

Price : $5.50 each (lots of 20 pieces $95) Limited quantity is available.

Be sure to see our DrawBars at MA110

(see our “Discount schedule”)

Ordering Code: MA115

Click here for warranty

Name : MacroJunior 5.5mm Plate
Manufacturer : System 3R
Part number: 3R-SP19270
Condition :
 USED excellent plus

Price : $1.00 each (lots of 20 pieces $18)

Be sure to see our DrawBars at MA110 and “Coins” at MA113

(see our “Discount schedule”)

Ordering Code: MA116

Click here for warranty

Name : MacroJunior master gage
Manufacturer : System 3R
Part number: 3R-
Condition :
 USED  excellent plus

Price : $525

(see our “Discount schedule”)

Ordering Code: MA117

Click here for warranty

Name : MacroJunior Coin/Holder
Manufacturer : System 3R (the pallet)
Part number: 3R-491E
Condition :
 USED excellent plus (they look new)
Description : .375” bore x .400 deep. One side set screw.

Price: $19  Now: $11 each (6 available with pallet mounted)

Price: $15  Now: $7 each (13 available without pallet mounted)

Be sure to see our DrawBars at MA110 and MA113 Jr. Pallets

(see our “Discount schedule”)

Ordering Code: MA126

Click here for warranty

Name : Macro Custom Wire Chuck
Manufacturer: Hermann Schmidt
Description: Stainless with lever action

Price: $3150  Now: $1945

(see our “Discount schedule”)

Ordering Code: MA150

Click here for warranty

Name : Controllers
Manufacturer : System 3R
Condition :   USED
Description : We have many controllers, click image to see some of them.

Price: Contact Sunspot for details

Ordering Code: MA160

Click here for warranty

Name: Magnetic Chuck controller
Manufacturer : System 3R
Condition :   USED , fine condition
Description : Controls the System 3R 100mm magnetic chuck. Works perfectly.

We have many variations, contact us for price and details.

SOLD (we have others, contact us for details)

(see our “Discount schedule”)

Ordering Code: MA170

Click here for warranty

Name : Manual Chuck, Macro Jr.
Manufacturer : System 3R
Part number:
Condition :
  USED , excellent plus
Description : Excellent tool for lathe or whirly gig adaptation. 3 M6 screws hold this tool to your adapter.

Price:
  $675  

(see our “Discount schedule”)

Ordering Code: MA180-NEW

Click here for warranty

Name : Macro Table Chuck - Automatic
Manufacturer : System 3R
Part number : 3R-610.46-3
Condition :
 NEW  see the used chuck above (MA180)
Description : Pneumatic, 1 year warranty

Price: $3350
- Now: $2650 ($6500 from System 3R)

(see our “Discount schedule”)

Ordering Code: MA190

Click here for warranty

Name : Macro/Jr 5C lathe chuck
Manufacturer : System 3R
Part number: 3R-460.32
Condition :
 USED  , excellent plus
Description : Turn electrodes on 54mm and Jr. pallets. Floading base allows you to tram the chuck to run on center.

Price: $1990  Now: $1350

(see our “Discount schedule”)

Ordering Code: MA210

Click here for warranty

Name : SNT holder
Manufacturer : System 3R
Part number : Unknown
Condition :
 USED , like  NEW
Description: Flange has bolt pattern for Macro Chuck

Price: $125  Now: $99

(see our “Discount schedule”)

Ordering Code: MA220

Click here for warranty

Name : 20mm holder
Manufacturer : System 3R
Part number : Unknown
Condition :
 USED
Description : Has M6 bolt pattern for Macro Chuck

Price : $50

(see our “Discount schedule”)

Click here to print this page